+1.708.552.4012

Round damper + Electro Balance Universal damper drive + Single Connector Interface Damper System Features & Typical Application Damper system consists of the Electro-Balance™ EB-UDD universal damper drive, MAT EB-250 round damper (or damper by others), a plenum rated wire/connector bundle, and EB-SP1 single connector interface Damper is adjusted using EB-RC battery powered hand held remote (only one required per job)   Typical application is for branch duct balancing, or take-off balancing where the point of damper adjustment is to be in proximity to the air outlet EB-UDD damper drive is assembled to the MAT EB-250 damper (and tested) prior to shipment The EB-SP1 single connector surface termination is designed to be an aesthetic alternative to an "inside the air stream" approach Round Damper (EB-250) Available in 6 to 20 Ø Single blade shaft driven damper 20 ga. galvanized steel construction EB-UDD drive mounted to damper prior to shipment Open/close blade stops Electro-Balance™ Universal Damper Drive (EB-UDD) A one piece unit consisting of the worm gear drive and damper actuator pre-wired with plenum rated wire/connector bundle  Pre-assembled to damper prior to shipment 15 second open/close timing provides adequate damper position resolution  Operated with EB-RC battery powered hand held remote Single Connector Finished Surface Interface (EB-SP1) UL 94-V0 flammability rated white nylon material Two piece unit installed manually 1 3/8" diameter surface plate mounts flush to the ceiling Connector access through a removable plug in the surface plate

AboutProductsWhy Choose MATSales RepsContactHome
+ 1.708.552.4012   800.585.7686    © 2010 Metropolitan Air Technology, A Steelhead Corp Company.All rights reserved.